جهاز قراءة وزن لتعويض الميل K491
R420-K491 and R423-K491
جهاز قراءة وزن لتعويض الميل K491 is a general purpose indicator that uses an accessory module to connect to a 2 axis tilt sensor that provides tilt compensation. جهاز قراءة وزن لتعويض الميل K491 is ideal for specialist truck OEM’s requiring electronics for accurate load weighing solutions where the load may be on an angle. Both the ABS R420-K491 and stainless steel R423-K491 are ideal for panel mounting in a truck cab, featuring a large display and programmable function keys. The application is for a truck to have accurate weight readings that can compensate for uneven surfaces where a weight reading might be taken
Simple calibration: Zero/Span calibration (at 0 angle) and tilt calibration to generate the four tilt parameters that are used to correct the reading.
Accessories: The K491 Tilt Compensating Indicator requires a tilt module and tilt sensor.
- Tilt Module (M4211)
- Rinstrum tilt sensor (M4) suitable for +/- 10 degree
- The tilt sensor must be correctly mounted given the axes that are providing data
- The K491 Tilt Compensating Indicator is compatible with a selection of the other sensors up to +/-15 degrees
Custom printing: dockets can be customised for the application. The built in RS232/RS485 port can be configured for printing.The K491 Tilt Compensating Indicator is a general purpose indicator that uses an accessory module to connect to a 2 axis tilt sensor that provides tilt compensation.
R400 Series K491 firmware is approved for trade use in Australia. S362 includes Variant 4.
جهاز قراءة وزن K491 الذكي
1. Zero Calibration (at 0 angle)
- Performed on level surface
- Tilt sensor is automatically set to 0
- Calibrates out any inaccuracies
2. Span Calibration (at 0 angle)
3. Tilt Calibration – this generates four tilt parameters that are used to correct the reading.
..now that’s smart weighing.
تحميل الملفات الخاصة بالمنتج
The following files are available for download for جهاز قراءة وزن لتعويض الميل K491. Ensure you select the correct documentation for your unit’s software version. Check back regularly for software and other updates.
To download files, please click on a filename below. A save dialogue box should appear allowing you to specify your save location.
If a save dialogue box does not appear, right click on the link and select save target as.