أنظمة فحص المنتجات / موازين فحص المنتجات

النقاط الرئيسية و المميزات

موازين فحص المنتجات الذكية / موازين مراجعة الوزن / موازين السيور المتحركة توفر عملية وزن دقيقة و سريعة للمنتجات أثناء الإنتاج.

مع موازين فحص المنتجات / موازين المراجعة عالية الدقة، يمكنك تقليل الخامات أو المواد المهدرة نتيجة زيادة الوزن عن الحد المسموح به مما يساعد على تقليل تكاليف الإنتاج.

موازين فحص المنتجات / موازين مراجعة المنتجات / موازين السيور موديل “Ezi-Check”

*١ يعتمد على شكل وحالة المنتج وبيئة التركيب.
*٢ الأبعاد الخارجية و وزن المنتج هي للمواصفات الأساسية و بدون الخيارات الأخرى و ذراع الطرد
*٣ يجب تهيئة الذاكرة الصغيرة USB على نظام FAT32.
*٤ برجاء توفير كابل كهرباء Φ٤-٧مم

Checkweigher system model AD-4961 consists of four units: an infeed conveyor unit, a weighing conveyor unit, a control unit and a base unit, allowing fast and simple assembly.
In the case of system shutdown, you do not need to wait for a service engineer to respond to the issue.
Just simply replace the unresponsive module by yourself, so that you can shorten system downtime and maximize production efficiency.

This checkweigher system is Equipped with Modbus RTU/Modbus TCP as standard.
With Modbus communication, seamless connection can be easily achieved.
Operations such as stopping and starting weighing, collecting data and changing product can all be set from an external device.

AD4961-01 Display stand

The display is attached on the opposite side from the standard display position, across from the user.
The display is located approx.
310mm above the conveyor belt.

AD4961-02 Tower light

Highly visible three color LED tower light.
Easy configuration with the AD-4961 checkweigher using DO (Digital Output) map setting.
*AD-4961-01 display stand is required to install this option.
*Dust and water resistance level is IP53.

AD4961-11 Upper breeze break

Anti-static breeze break prevents air currents to the weighing conveyor and static electricity to achieve accurate weighing.
Clearance between the conveyor belt and the breeze break is 135mm.
Use together with the lower breeze break is recommended.
Material : PVC anti-static plate
*This option is for AD-4961-2KD-2035.

AD4961-12 Lower breeze break

Prevents air currents from underneath the system to ensure accurate weighing.
Use together with the upper breeze break is recommended.
Material : Stainless steel
*This option is for AD-4961-2KD-2035.

AD4961-13 Cross plate

Eliminates gap between infeed conveyor and weighing conveyor and conveys products smoothly.
Suitable for weighing small products.
Material : Stainless steel
*This option is for AD-4961-2KD-2035.

AD4961-14 Product guide

Installed on both infeed and weighing conveyors.
Adjusts products to be conveyed on the center of both conveyors.
Applicable product width is from 50mm to 100mm.
Material : Stainless steel
*This option is for AD-4961-2KD-2035.

AD4981-2057 Flipper type rejector

AD4982-2035 Conveyor drop rejector

Please prepare an air compressor with a φ6mm air tube to be connected to the filter regulator of the rejector.
Air supply: 0.5MPa, 0.1NL/time

AD4983-3050 Pusher rejector

Please prepare an air compressor with a φ6mm air tube to be connected to the filter regulator of the rejector.
Air supply: 0.5MPa, 3.0NL/time